4G LTE CPE 3
ST-LB622S

The LTE CPE B622-335 is a Long Term Evolution (LTE) wireless gateway for multiple users in household or small office environments. It enables users to access the Internet.

The LB622S supports 3GPP Release 11 with LTE CAT 6+. The supported service functions are as follows:

Data service up to DL 400 Mbps(256QAM) and UL 75 Mbps(64QAM)
Working band: LTE: B1/B3/B7/B8/B20/B38/B40/B41/B42/B43, UMTS: B1/B8
Voice service: CS/VoIP (Optional) / VoLTE (Optional)
Wi-Fi: 802.11 b/g/n/a/ac/ax. 802.11b/g/n 2.4GHz Wi-Fi 2×2 MIMO up to 300Mbps, 802.11a/n/ac/ax 5GHz Wi-Fi 2×2 MIMO up to 1.2Gbps. Maximum Users: 64
1 GE port for LAN/WAN, 3 GE ports for LAN
Multi APN function (Optional) for Data, Voice (VoIP), TR-069 services
Routing mode: NAT enable (Default) / IP pass-through (Optional)
VPN client service (L2TP, PPTP)
Customer management via WebUI or the device management app
Operator maintenance via TR-069 (Optional) and TR-143 (Optional)
Firmware Over the Air (FOTA)

Hardware Specifications

Item	Description
Technical standard	WAN	3GPP Release 11
	LAN	IEEE 802.3/802.3u
	Wi-Fi	IEEE 802.11a/b/g/n/ac/ax
Working band/frequency	LTE	B1/B3/B7/B8/B20/B38/B40/B41/B42/B43
	UMTS	B1/B8
	Wi-Fi	2.4 GHz: 2421 MHz -2483.5 MHz, 5.0 GHz: 5170 MHz -5330 MHz &5490 MHz-5710 MHz
External port	● One power adapter port ● One LAN/WAN port (RJ45), three LAN ports (RJ45) ● One phone port (RJ11) ● Two external LTE antenna ports (SMA) ● One SIM card slot (nano-SIM)
Antennas	● Built-in LTE/UMTS primary antenna ● Built-in LTE/UMTS secondary antenna ● Built-in Wi-Fi 2.4 GHz and 5.0 GHz antenna
LED Indicators	● One Internet status indicator White: Connected to the Internet. Red: No SIM card is inserted or detected, or the SIM card has insufficient balance. ● One Wi-Fi indicator On: Wi-Fi is enabled. Flash slowly: A pairable HiLink device is detected. Flash quickly: HiLink pairing is in progress/WPS connection is in progress. Off: Wi-Fi is disabled. ● The indicator starts to flash slowly only when B622-335 detects a new HiLink device. ● One group of signal strength indicators Signal reception available (more indicators mean better reception).
Buttons	● One Power ON/OFF switch ● One WPS button ● The Wi-Fi indicator flashes slowly when the router detects a HiLink device. Press the WPS button to connect the HiLink device to the router’s Wi-Fi. ● When the Wi-Fi indicator is steady on, press the WPS button to enable WPS. ● One Reset button

Software specifications

Item	Description
LTE features	DL 4×4 MIMO
	DL 256 QAM, UL 64 QAM
Mobile network	APN management
Gateway	Router	● Supports the default route: 192.168.8.1. ● Supports manual configuration of LAN IP addresses. ● Supports Address Resolution Protocol (ARP).
	DHCP server	● The DHCP server can be enabled or disabled. ● The address pool of the DHCP server can be configured. ● The lease can be configured. ● Supports the DHCP server and DNS relay.
	NAT	● Supports NAT and NAPT (compliant with RFC2663, RFC3022, and RFC3027). ● Supports cone NAT. ● Supports Symmetric NAT.

	ARP
	ICMP
	IPv4v6 dual stack IPv6 only (Optional , CLAT for LAN side IPv4 device access Internet) IPv4 only (Optional)
	VPN pass-through
VPN client	● Support L2TP VPN client ● Support PPTP VPN client
SMS	● Writing/sending/receiving ● Writing/sending/receiving extra-long messages
Data service	LTE : DL 400 Mbps, UL 75 Mbps DC-HSPA+: DL 42 Mbps, UL 5.76 Mbps HSPA+: DL 21 Mbps (64QAM), UL 5.76 Mbps HSPA: DL 14.4 Mbps, UL 5.76 Mbps WCDMA PS: DL 384 Kbps, UL 384 Kbps
	Wi-Fi 802.11b/g/n/a/ac/ax
	Supports multi APNs (Optional, one for data, one for voice, and one for TR-069).

Item	Description
VOICE	CS	Supports CS voice communication over UMTS networks.
		Supports circuit switched fallback (CSFB).
		Supports the following phone features: ● Caller ID generation ● Call waiting ● Call forwarding (unconditional, busy, and no answer forwarding) ● Call hold ● Three-way conference ● Originating Identification Presentation/Restriction ● Outgoing Communication Barring
	VoLTE (Optional)	● Supports AMR-NB codec ● Supports AMR-WB codec
		Supports SRVCC to UMTS
		Supports in-band/out-band (RFC2833) DTMF
		Supports the following phone features: ● Caller ID generation ● Call waiting ● Call forwarding (unconditional, busy, and no answer forwarding) ● Call hold ● Three-way conference ● Originating Identification Presentation/Restriction ● Outgoing Communication Barring
Firewall setup	● Firewall enable/disable ● URL filtering ● LAN IP filtering ● Port forwarding (Virtual server) ● Port triggering (Special Application) ● DMZ service ● UPnP service ● ALG settings
LAN	● 10/100/1000 Mbps auto-negotiation ● MDI/MDIX auto-sensing ● IEEE 802.3/802.3u-compatible

Item	Description
Wi-Fi	Broadcasts and hides service set identifiers (SSIDs)
	Complies with IEEE 802.11b/g/n/a/ac/ax
	WPS
	WMM
	Encryption	AES, and TKIP + AES
	Security mode	● Open ● WPA2-PSK ● WPA/WPA2-PSK ● WPA3-SAE ● WPA2-PSK/WPA3-SAE
	MAC address authentication	● Supports the MAC address authentication whitelist. ● Supports the MAC address authentication blacklist. ● Supports a maximum of 32 MAC address entries.
	STA	● Supports inquiry of STA status. ● Supports a maximum of 64 connected stations.
Operator maintenance (Optional)	● Supports TR-069 Amendment III ● Supports TR-098 Amendment II ● Supports TR-143 Amendment I ● Supports TR-104 Amendment I (if VoIP is available)
USIM	PIN management and USIM card authentication
NTP	Supports daylight saving time (DST) (Optional).
Maintenance	Supports viewing the current diagnosis results and operation logs.
The device management app	● View data traffic usage and SMS. ● Manage connected devices. ● Change CPE’s SSID and password.
System requirements	Operating system	Windows 8, Windows 8.1, Windows 10 (Not support Windows RT), MAC OS X 10.12, 10.13, 10.14 and 10.15.
	Web browser	● Microsoft Internet Explorer 9.0 and Microsoft Edge 14.0 with latest updates. ● Firefox 60.0 with latest updates. ● Chrome 60.0 with latest updates. ● Safari 10.0 with latest updates. ● Opera 51.2 with latest upgrades.
	Your computer’s hardware system should meet or exceed the recommended system requirements for the installed OS version.